HiKOKI Bandslip SB8V2WAZ
Fördelar och nackdelar
av våra specialister
HiKOKI SB8V2 bandslip hyllas för sin kraftfulla motor, variabla hastighet och användarvänlighet. Det transparenta fönstret och bekväma handtag möjliggör noggrant arbete. Dammpåsen håller arbetsytan ren. Nackdelar är vikten, avsaknad av styrning och ljudnivån. Mindre lämplig för precisions- eller långvarigt arbete ovanför huvudet.
Recensioner av HiKOKI Bandslip SB8V2WAZ
Baserat på 190 recensioner
Well built, sturdy, and easy to operate belt sander. Dust bag minimizes personal exposure.
Well built, sturdy, and easy to operate belt sander. Dust bag minimizes personal exposure.
Scott from Michigan
22 september 2026
Overall a good sander, the variable speed is very handy, and it is stronger than some of its competitors. The only con I found is that the motor is so heavy that it naturally leans to one side. While using it, you have to account for the unbalanced weight while gripping it, instead of letting the weight of the sander do the work
Overall a good sander, the variable speed is very handy, and it is stronger than some of its competitors. The only con I found is that the motor is so heavy that it naturally leans to one side. While using it, you have to account for the unbalanced weight while gripping it, instead of letting the weight of the sander do the work
Two Dollars
24 augusti 2026
This belt sander was returned the same day it was purchased. The sanding belt would not track at all. I would set the tracking to the center of the belt path, even let it run for a minute to make sure the tracking was centered. I started sanding and after 30 seconds of sanding the sanding belt was half off the machine. I then had to stop and recenter the tracking of the belt. I tried three different sanding belts from three different manufacturers, all did the same thing ( yes the belts were installed properly, in the correct direction). After 30 minutes of messing with this, I gave up. This is either a defective unit or a very poor design. This was, without question, the worst belt sander I've ever encountered.
This belt sander was returned the same day it was purchased. The sanding belt would not track at all. I would set the tracking to the center of the belt path, even let it run for a minute to make sure the tracking was centered. I started sanding and after 30 seconds of sanding the sanding belt was half off the machine. I then had to stop and recenter the tracking of the belt. I tried three different sanding belts from three different manufacturers, all did the same thing ( yes the belts were installed properly, in the correct direction). After 30 minutes of messing with this, I gave up. This is either a defective unit or a very poor design. This was, without question, the worst belt sander I've ever encountered.
James56
18 augusti 2026
The cover over the drive belt broke off the first day I used the sander and after about 4 weeks of use the sanding belt wouldn't stay on.
The cover over the drive belt broke off the first day I used the sander and after about 4 weeks of use the sanding belt wouldn't stay on.
User 4
20 juli 2026
I have been using the belt sander with 40 grit sandpaper to sand down a bunch of rough sawn Applewood boards about 1 inch thick and it is doing a pretty good job. It feels well balanced in my hands and not to heavy to use for long periods of time. The belts are easy to change. Not sure why the metal plate is wider than the belt but seems to work OK
I have been using the belt sander with 40 grit sandpaper to sand down a bunch of rough sawn Applewood boards about 1 inch thick and it is doing a pretty good job. It feels well balanced in my hands and not to heavy to use for long periods of time. The belts are easy to change. Not sure why the metal plate is wider than the belt but seems to work OK
Patrick Legel
19 juli 2026
